16. Additionally, since my next step was to add a pair of brackets that will mount the intercooler directly to the core support, I wanted to ensure that I didn’t effectively tie the core support to the frame via the intercooler (since the core support mounts in a similar fashion to the frame). This will allow the core support and the intercooler to flex atop the chassis similar to the fenders and the body. I made a pair of aluminum brackets using ¼-inch aluminum angle, a hole saw, and a couple ¼-inch button head fasteners. With the brackets attached to the core support, I positioned the intercooler a final time before tack welding the brackets to it.