One Piece Power Windows Install Newly Adjusted Regulator
|
In caption #6, I marked the glass edges to the door. By holding the newly adjusted regulator to the door I was able to see where an appropriate mounting tab could be installed to the doorskin, without interfering with the glass. The Specialty kit comes with two U-shaped slotted mounts. By cutting a rectangular hole in the skin, the mount can slide into place. Then bend the tabs over the doors and weld or bolt them in position. The depth of the mounts should flow with the glass on an imaginary perpendicular line to the angle of the door opening. (On a side note, if welding, only tack them in position until the window is installed in the regulator and has been tested.) View Related Article
|
|