Tanked

Doc’s Kustom has a gas tank manufacturing division, that is, oddly enough, named Kustom Tanks. They will gladly build you a custom tank made to your own specifications, or, because the company makes a variety of tanks in useful sizes, they may already have one on the shelf that will fit your application.

All Kustom Tanks assemblies are built from lightweight 5052 aluminum and are internally baffled and pressure tested. Every tank is constructed with a sender ring, filler neck, internal pickup tube, and rollover valve for added safety. They even install a free sender in every tank they sell.

Also shown here is Doc’s billet aluminum fuel injection pump module featuring a high-performance pump, which can be ordered separately or installed in your tank assembly. Just tell them what you need and they’ll do the rest. All products are made in-house in the USA.

Doc's Kustom
(229) 528-4300
www.docskustom.com

XL Pan for Fords

There is no such thing as having too much oil. It’s the blood of your engine, and without sufficient oil, it will die. High performance engines, under heavy stress, cannot be subjected to oil starvation without suffering expensive internal damage of some kind. Proform Parts has come to the rescue with this inexpensive 7-quart capacity oil pan (PN 68050) for street and strip small-block Ford engines.

The pan is zinc iridited for corrosion protection, and the sump is 8¼-inches deep. A splash baffle is provided to keep the oil in the bottom of the pan for quick pick up.

Proform Parts
(586) 774-2500
www.proformparts.com

Shiny Rollers

In an effort to answer one of the most common car care questions, Meguiar’s introduces its new All Metal Wheel Polish, a product that transforms dingy, oxidized wheels into like-new shape in just minutes.

The all-new wheel cleaning formula acts quickly to remove oxidation without scratching and can be applied with either Meguiar’s DynaCone polishing tool or by hand. Leaving metals stunningly bright, this new product uses gentle polishing oils to achieve a perfect shine every time.

For use on all uncoated, polished or chrome metals, Meguiar’s All Metal Wheel Polish is safe to use on cast aluminum, magnesium and billet alloy.

Meguiar’s
(800) 347-5700
www.meguiars.com

Beefy Axles

Stock axle shafts might be adequate for stock applications, but the increased demands of a high-performance vehicle can result in failure of the stock shafts. Sierra Gear & Axle offers a complete line of chromoly axle shafts designed to survive the rigors of high-performance use. Built from 4340 chromoly steel, the Sierra Gear & Axle chromoly shafts are hardened and tempered to maximize their strength and ductility. The result is a heavy-duty axle shaft that is up to 40-percent stronger than typical stock axle shafts.

Whether you’re looking to upgrade your axles for added strength or simply need to replace a broken shaft, Sierra Gear’s chromoly axles are the perfect safeguard and are backed by their ten-year limited warranty. These premium axles are available for Ford, GM, and Dodge applications.

Sierra Gear & Axle
(800) 359-4737
www.sierragear.com

Battery Toggle

Flaming River is proud to introduce its all new automatic battery disconnect switch. This heavy-duty 12V battery switch ties into your vehicle’s ignition to control and operate the vehicle’s battery system. When the ignition is turned to the OFF position, the battery is automatically disengaged and becomes non-operational.

Using uses passive magnetic solenoid operation, so as long as your vehicle is turned off, the battery system is automatically turned off as well. Kits available with or without 3 minute time delay.

Flaming River
(800) 648-8022
www.flamingriver.com

Stainless Steering Solution

When the Speedway Motors team went to the drawing board to design a new steering column, they had two goals in mind: simplicity and good looks.

The result is the new polished stainless steel steering column. This simple, attractive column is perfect for a wide range of classic trucks. It features a brilliantly polished 1¾-inch stainless steel main tube with a stylish 3-inch bell at the top. The sleek exterior houses rugged internals comprised of high-quality sealed ball bearings and a ¾-inch steel steering shaft with a Double-D end. The column accepts common three-bolt steering wheels and is available in 24-, 26-, 28-, 30-, 32-, 34-, 36- and 40-inch lengths.

Speedway Motors
(800) 979-0122
www.speedwaymotors.com