Custom Classic TrucksMagazine Homepage Custom Classic Trucks
Facebook Click here to find out more!

Shaving A Firewall Drill

 
 
Shaving A Firewall Drill
Shaving A Firewall Drill
Jason included a few other items on his templates that should be pointed out. First are the hood hinge mounting holes. The hood hinges attach to the firewall using nutserts attached from the factory. Not wanting to remove the stock mounting point, Jason simple-drilled two holes on both upper corners that will allow the stock attachment point to be retained. He also placed two strategically located holes in the center of each template so that he can plug-weld the panel to the firewall. Doing so alleviates the chance that the panels will vibrate against the firewall as it essentially mates the two together in the center as well as the perimeter. View Related Article
Shaving A Firewall Holes Sim Tech Center Logo Shaving A Firewall Unshaved Holes Shaving A Firewall Grinder Shaving A Firewall Smooth Surface Shaving A Firewall Sand Disc Shaving A Firewall Meaurement
Shaving A Firewall Sheet Shaving A Firewall Both Sides Traced Shaving A Firewall Tracing Shaving A Firewall Transfer Shaving A Firewall Cutting Panels Shaving A Firewall Freehand Cut Shaving A Firewall Template Cut
Shaving A Firewall Drill Shaving A Firewall Primer Shaving A Firewall Panels In Place Shaving A Firewall Tack Welds Shaving A Firewall Grinding Shaving A Firewall Finished
Get Adobe Flash player
Custom Classic Trucks