Cool Deal

The all-new C10 Chevy SureFit system now features Vintage Air’s proven Gen IV technology. These systems utilize their exclusive microprocessor control and servo motor drives to eliminate cable or vacuum operation, and their patented Cable Converter potentiometers convert your standard factory lever controls to fully electronic operation. Additional features of the Gen IV include a separate plate and fin a/c coil and their Cuprobrazed heater coil with a SPAL permanent magnet blower motor to deliver maximum performance and “just right” temperature adjustments. Sure Fit Systems come complete with evaporator kit with standard cable converters, compressor, mounting brackets, condenser kit, safety switch and all necessary refrigerant lines. In most cases, Sure Fit kits mount to factory holes in the dash and firewall.

Vintage Air
(800) 862-6658
www.vintageair.com

Pinned Down

There’s nothing more frightening or potentially more damaging than a hood that’s blown loose on your classic truck at high speeds. Eddie Motorsports new billet aluminum hoodpins will insure that this never happens to your hauler. The complete custom hood pin assemblies are CNC-machined from billet 6061-T6 aluminum and like all products produced by Eddie Motorsports, they are American made to the strictest manufacturing standards. The hoodpins are available in two styles, a smooth finish and Eddie’s new Diamond series (pictured), and with a variety of finishes including machined or brilliant polished finish, black or clear anodized. They are fastened to the hood with four blind studs and come with a billet adjuster nut and flip over pin with integral tether. An optional aircraft-style pushpin is available at an additional charge.

Whether you are looking for the ultimate in customizing or just want the security of knowing your hood will stay in place at high speeds, Eddie Motorsports hoodpins are the answer.

Eddie Motorsports
(888) 813-1293
www.eddiemotorsports.com

Perfect Polisher

Nothing looks quite as good as clean, bright wheels. If you have uncoated, polished or chrome metal wheels, then you know how hard it can be to keep them looking their best. Luckily, Meguiar’s has designed its all-new Wheel Polishing Kit with DynaCone Polisher tool to clean and brighten any uncoated metal wheel with ease.

Meguiar’s patented diamond-shaped DynaCone Polisher is extremely durable and allows consumers to reach difficult spots in complex wheel designs without tearing or destroying the foam tool. You provide the drill and Meguiar’s provides the rest.

Meguiar's Inc.
(800) 347-5700
www.meguiars.com

Beam Control

American Autowire is announcing a new Headlight Low/High Beam Control Module.

This electronic module replaces the ordinary dimmer switch so that when the headlight switch is on, the module resets to the low beam circuit. Alternate momentary grounds switch between high and low beam headlight circuits. When the headlight switch is off, holding the momentary switch to ground activates the “Flash to Pass” safety option on the high beam circuit for as long as the momentary ground is held.

The module accommodates standard sealed beam and halogen headlights in two and four light configurations and includes a 30-amp circuit breaker. The module takes the current load off the headlight switch and instead of passing power to the low and high beam circuits, the headlight switch simply provides a “headlights on” signal to the module.

The module can be attached to other modules with the supplied locking wedge or stand-alone with the included mounting bracket.

American Autowire
(800)482-9473
www.americanautowire.com