Bolt-In Burb
Scott's Hot Rods, in Ventura, California, have announced a new project in the form of a '65 Chevy Suburban. The chassis will feature Scott's new bolt-in IFS kit for '63-'87 Chevy trucks that will accept a myriad of suspension options, including air bags, which their 'Burban will be receiving shortly. Keep your eyes peeled to these very pages for a full install shortly.

Scott's Hot Rods
(805) 485-0382
www.scottshotrods.com

Hot Dot
Watson's Hot Dot Ignition Link is the perfect addition to their Hot Dot All-in-One ignition/start/stop switch. The Link is a Hot Dot-to-remote control interface relay that allows you to enable and disable your StreetWorks Hot Dot Ignition button using two functions on a remote control. Push one remote button and the Hot Dot Ignition operates, press a second button to disable the Hot Dot. The Link takes the place of a key lock to secure your car's ignition and can be triggered by either positive or negative (grounding) momentary trigger signals. Serving double duty, the Link can also be used as a latching on/off relay for 12 VDC, five-amp maximum loads.

Watson's StreetWorks
(860) 859 0513
www.watsons-streetworks.com

Glass Chassis
Superior Glass Works just announced the addition of the 1934-1936 Chevrolet pickup truck chassis to its broad line of street rod and truck chassis. This generation of Chevy pickup shares the classic lines of the popular mid-'30s Chevy cars and getting increasingly popular with enthusiasts. Like most old trucks, their chassis can show considerable wear after all these years. SGW offers a safe, strong, and good looking chassis built to Chevy's original specs that will accept original sheetmetal and reproduction fiberglass body parts and features heavy gauge, fully boxed rails and stout crossmembers and comes equipped with a Mustang II IFS and custom lowered leaf springs. The full range of suspension components from the leading manufacturers in the industry is also available for your custom build.

Superior Glass Works
(888) 731-7670
www.superiorglassworks.com

Easy AOD
Performance Automatic, Inc. has announced the release of their Street Smart Systems for all Ford-powered products. The demand for updated drivetrains that feature overdrive capabilities fostered the development of easy-to-install AOD packages for Ford small-block 289-351 w/c, FE 390-428 and big-block 400-429-460 power plants. Utilizing more than 25 years of Ford transmission experience, Performance Automatic refined the inner workings of the AOD and incorporated many gear train and hydraulic modifications that provide reliable overdrive functions for all Ford products. No computer is needed, and each package comes with a dyno tested AOD transmission, matching torque converter, filler tube and throttle pressure cable. All of this and a lifetime warranty assure a trouble-free installation for numerous applications.

Performance Automatic, Inc.
(301) 963-8078
www.performanceautomatic.com

Big Brakes For Smaller Wheels
Wilwood Engineering's new 11-inch Internal Drum E-Brake Rear Kits are perfect for enthusiasts who have original trucks that are running smaller diameter rear wheel sizes. This kit will be perfect for all 15-inch-diameter wheels and will also work with many 14-inch wheels that are designed to clear disc brakes. The brake kit features Wilwood's special internal drum parking brake design that allows an efficient parking brake system that is easy to install and a snap to hook into the stock parking brake cable system. The kit features a forged billet Dynalite caliper in a Platinum -E, red, black, and polished finish for a show appearance. The kit also features an 11-inch rotor that works with the internal brake assembly and is available in a standard smooth design or slotted and drilled for a more aggressive appearance. This kit has been designed to fit all of the rear axle assemblies that Wilwood offers rear brake kits for. The forged billet Dynapro caliper in this kit will work harmoniously with all of their front brake kits as well.

Wilwood Engineering
(805) 388-1188
www.wilwood.com

Tilt & Turn
Classic Performance Products, Inc. introduces their five-way adjusting tilt columns for early Chevy trucks. Made from paintable stainless steel tube, the columns are available in 30-, 32- and 33-inch lengths. CPP's steering columns works with the standard 1-inch DD output shaft and accepts any 1967-1994 GM steering wheel or aftermarket adapter. Column shift columns come with both three-speed and Overdrive shift indicators.

The perfect complement to their line of steering columns is CPP's new nickel-plated U-joints. CNC-machined and precision-broached for a perfect fit the stainless steel sealed bearing cap and nickel plating gives a polished stainless look. Their U-joints work up to a 30-degree angle and are available in all popular sizes.

Classic Performance Products, Inc.
(714) 522-2000
www.classicperform.com

Power Windows For The Masses
Performance Online, Inc. has really done it this time! This is the first power window conversion for virtually any vehicle on the market. POL's unique cable design allows you to mount the window motor almost anywhere in the door. The latest in POL's new product line, this unique setup uses the original window regulator and is designed to withstand 61/2-plus pounds at a distance of nearly 3 inches from the center of the regulator. This effort is enough for most vehicles and provides a nice smooth operation. These kits can also retain the original window handle (if desired) for that unique, retro look.

Performance Online, Inc. (POL)
(800) 638-1703
www.performanceonline.com

Award-Winning Instrumentation
To celebrate their upcoming 25th anniversary, Dakota Digital released a new lineup of hybrid analog/digital instrumentation systems, perfectly complementing the digital products they've become known for. The first release of this new VHX Series was presented in the hotly contested New Products section of the SEMA Show. With more than 1,600 products gunning for the top spot in their respective product categories, Dakota Digital is proud to have brought home the top honor in the "Street Rod/Custom Product" division! "Winning a SEMA New Product award is a lifetime achievement; the recognition from our peers is indescribable. Releasing a new product line with this type of momentum is nothing short of amazing," says Ross Ortman, President/CEO.

Dakota Digital
800-852-3228
www.dakotadigital.com

Late-Model Bow Tie Parts
Now available from LMC Truck: parts and accessories for 2007-2010 Chevy/GMC trucks and SUVs. A wide variety of parts and accessories for the late-model Bow Ties increases an already staggering inventory for all things truck-related, be it Dodge, Ford, Chevy, or GMC.

LMC Truck
(800) 562-8782
www.lmctruck.com

  • «
  • |
  • 1
  • |
  • 2
  • |
  • View Full Article