Tough Guns
To meet the demands of welding applications ranging from light- to heavy-duty, Tregaskiss offers two brands: TOUGH GUN MIG Guns and TGX MIG Guns. Both MIG guns feature Tregaskiss' exclusive TOUGH LOCK Retaining Heads with Dual Taper Technology, a tapered design that locks the contact tip securely in place and keeps it centered to provide consistent weld quality.

TOUGH GUN MIG Guns are designed specifically for welding on heavy-duty applications, including those with extended arc-on times and ones in harsh or abusive environments. Available in 350-, 450-, 550-, and 650-amp air-cooled models, and 400- and 600-amp water-cooled models with cable lengths ranging from 10- to 25-feet or in custom lengths.

For light- to medium-duty welding applications, Tregaskiss designed its TGX MIG Guns for welding thinner materials and on applications with short arc times, including hobby applications or repair and maintenance jobs requiring tacking or shorter length welds. These MIG guns have a standard duty gooseneck insulator and nozzle along with a polymer-armored gooseneck and are available in 10-, 12-, and 15-feet cable lengths.

Tregaskiss
(877) 737-3111
www.tregaskiss.com

Big Hoops
Hot off the line is Wheel Vintiques new 18-inch steel Rally. Yes you heard right, an 18-inch steel Rally wheel! Awesome right? The 18-inch diameter Rally is available in 7- and 8-inch widths with a variety of standard and custom backspaces. Don't forget about caps, Wheel Vintiques has many of the popular styles available such as derby, police, disc brake, and even truck caps. Trim rings will be available soon. Wheels come bare steel, but you can also have them chromed or powdercoated for an additional cost. Bolt patterns for both Chevy and Ford 5-lug are also available.

Wheel Vintiques Inc.
(559) 251-6957
www.wheelvintiques.com

Dizzy
Performance Distributors has applied their ignition expertise to the popular ZZ series of crate engines with their new ZZ Crate Engine D.U.I. Distributor. This new D.U.I. (Davis Unified Ignition) is specifically designed for the ZZ4, ZZ454, and the ZZ502. Performance Distributors calibrates the advance curve on a distributor machine to accommodate the GM Performance Catalog's timing recommendations resulting in instant throttle response and maximum performance throughout your rpm range, while protecting your crate engine from detonation. Pinpoint accuracy will be achieved by coordinating your mechanical advance with the proper vacuum advance and by using a melonized distributor gear is to mesh properly with the crate engine's steel hydraulic roller camshaft.

The distributor comes complete, including the dependable Street/Strip D.U.I. Coil and Dyna-Module.

Performance Distributors
(901) 396-5782
www.PerformanceDistributors.com

Tied Up, Tied Down
Many people risk damaging their vehicle every time they tow it by using old or poorly-made tie-down equipment. Mac's Custom Tie-Downs is proud to offer a new solution: the Ultra Pack. By combining the premium quality parts in a pre-engineered system, the Mac's Ultra Pack includes everything you need to tie your car or truck down safely and securely while protecting it from damage during transport.

The Ultra Pack includes four 6- or 8-foot ratchet straps (or a combination of both), four axle straps, four strap wraps, and a free duffle bag to stow the gear when not in use. Straps are available in red, blue, black, or yellow and are rated at a 10,000 pound capacity.

Mac's Custom Tie-Downs
(866) 386-5992
www.macstiedowns.com

Hands-Free Disconnect
Do you have a hard to access battery? Are you sick of having to take apart half of your vehicle to maintain, charge, or jump your ride? Rad Rides By Troy has the solution to these problems with their All-Inclusive Voltage Kit. This includes charging lugs with bezel, remote battery shut off, billet battery tray, and an XS Power D975 Battery.

The first part of the solution is a remote lug charging station. It comes in either a flush panel bezel mount or a frame mount depending on where you want to mount it. This allows you to service your battery or jump start without tearing your vehicle apart.

The next part is a remote key fob-operated battery shut off. It allows you to disconnect your battery for storage, transport, or safety without ever picking up a wrench. Simply click the key fob to connect or disconnect the battery. Whether in your garage, at a show, or even at the grocery store it acts as a major theft deterrent. It is near impossible to start you ride with the battery disconnected. The switch is wired into the system after the charge lugs and is rated for an amazing 1,100 amps. That way you can tend to your battery without risk to any of your electrical components. The best part is the shut off monitors your battery voltage; if it drops below 11.8 volts while at rest, the system disconnects automatically to save enough power to get you started again.

The final parts are an XS Power D975 compact battery and a billet battery tray. Don't let the small size fool you; the D975 can deliver 1,000 initial cranking amps for 15 seconds!

Rad Rides By Troy
(815) 468-2590
www.radrides.com

What a Gas!
American Gasser has released a line of '60's style performance gauges perfect for that period truck build. The set comes standard with a 33/8-inch diameter mechanical speedometer and electronic tachometer, and the remaining electronic 21/16-inch diameter gauges include: oil pressure, water temperature, fuel level, and voltmeter. An electronic speedometer is also available. The gauge sets ship complete with sending units, brackets, and hardware necessary for installation.

American Gasser, Inc.
(330) 722-7241
www.americangasser.com

A Pairof Teardrops
Mar-K Quality Parts now makes teardrop pieces for your original GM '54-87 Stepside bedsides. Add that finishing touch to your bedside with a Mar-K teardrops. Just weld it onto the rear curl of your bedside for a smooth, custom look. This 16-gage steel piece may be purchased for welding to original GM '54-87 Stepside bedsides or you can choose to let Mar-K do the work for you! Order these teardrops as "custom upgrades" when you order your Mar-K bedsides and the will weld on the teardrops when they make the bedsides! You save time and money on work at the body shop!

Mar-K Quality Parts
(405) 721-7945
www.mar-k.com

Matte Clear
The folks at Kirker have introduced a hot new Matte Urethane Clearcoat, allowing for custom matte finishes over basecoats, single-stage topcoats ... even existing paintjobs. It's just as durable as conventional clears, providing the same superior protection against stone chips and regular everyday exposure. It stands up to the test of time too, holding its finish with awesome resistance to scuffing and marring.

Kirker Automotive Finishes / Smart Shoppers, Inc.
(800) 541-0399
www.smartshoppersinc.com

  • «
  • |
  • 1
  • |
  • 2
  • |
  • View Full Article