Mount And Convert
Energy Suspension's Hyper-Flex polyurethane performance motor mounts are now available for GM LS-series engine conversions. Each complete set (two mounts and adapters) allows for the mounting of an LS1/LS6/Vortec 4.8, 5.3, or 6.0L V-8 in a chassis originally designed for a first- or second-gen Chevy small-block. Each set includes their polyurethane mounts that are impervious to undercar chemicals, road salts, and atmospheric conditions and with their patented interlocking feature, you'll be reassured that your engine stays secure to the chassis you bolted it to.

Energy Suspension
(949) 361-3935
www.energysuspension.com

Trique Trap
Trique Mfg. introduces the Altman Easy Latch, a vehicle-specific, bolt-on bear claw latch kit that uses your exterior door handles, exterior locks, and interior door handles. Each kit comes with everything you need to have your doors opening and closing smoother and safer, including stainless steel striker bolts. Each jamb plate is precisely contoured to fit your vehicle. Trique Mfg. designs, produces, and assembles all of their latch components here in the USA. to work specifically with your truck, with kits available for '40-56 Ford and '47-59 Chevy trucks.

Trique Mfg.
(866) 987-4783
www.triquemfg.com

Spun Out
The air cleaner on your truck's engine does more than just filter out dirt and dust. It also helps define the style and character of your truck's engine compartment. The air filter assembly is the first thing most people see when you open your hood-so why not choose one that is best tailored to your truck's design? Speedway Motors' new Nostalgia Spun Aluminum Air Cleaner has a distinctive style that's perfect for a wide range of stock and custom truck applications. Spun from high-quality aluminum, the contoured air cleaner lid has a domed-top, mushroom-shape design similar to popular air cleaners from the '50s. The base fits common 51/8-inch four-barrel carburetor necks and supports a high-flow air filter element. Measuring in at 8 inches in diameter and 33/8 inches tall, the assembly is perfect for all single four-barrel carburetor applications. The top's natural spun-aluminum finish provides a nostalgic, competition-influenced appearance, but can also be polished or painted by the end user for a truly custom look. Wing nut and carburetor stud sold separately.

Speedway Motors
(800) 979-0122
www.speedwaymotors.com

Some Like It Hot!
Watson's new Billet Chili Pepper Levers will definitely spice up your life. For manual and power safety locks or other applications with a 1/4-inch shaft, the gently curved lever has a ball-milled "vein" in both left- and right-hand pieces and is held in place with set screws.

Watson's StreetWorks
(860) 859-0513
www.watsons-streetworks.com

C-Clip Eliminator
Strange Engineering introduces a new style, specifically designed for street and/or strip, C-clip eliminator for most 10- and 12-bolt GM car rearends equipped with C-clip style axles. In the past, C-clip eliminators for these applications have been designed for drag racing, which use ball bearings. Ball bearing C-clip kits are fine for drag racing, but are prone to leakage and premature failure when used for prolonged street use. This specially designed C-clip eliminator kit (A1033) utilizes Timken unit (tapered) bearings, which survive severe side-loads and constant use. The Strange A1033 also features two seals per axleshaft, ensuring a completely sealed axle end. Complete axle and C-clip eliminator packages are also available.

Strange Engineering
(847) 663-1701
www.strangeeng.net