Custom Classic TrucksMagazine Homepage Custom Classic Trucks
Facebook Click here to find out more!

Connecting Blue Wire To The Tach Terminal

 
 
Connecting Blue Wire To The Tach Terminal
Connecting Blue Wire To The Tach Terminal
To connect the Dakota Digital tachometer an additional wire (blue) had to be run from the tach terminal on the GM HEI distributor (Davis DUI in this case) through the existing speedo cable hole in the firewall and connected to the tach terminal on the control box. View Related Article
Oil Pressure Sending Unit Dakota Digital Oil Pressure Sending Unit Removing Stock Water Temp Sending Unit Stock Chevrolet Sending Unit Dakota Digital Sending Unit Stock C10 Analog Gauge Cluster Removing Stock Gauge Cluster
Stock Th350 Cable Disconnected Disconnecting The Speedometer Cables And Wire Harness Removing Stock Wiring Harness Cut Off The Stock Harness Ends Blown Blade Type Fuse Dakota Digital Control Box Routing The Wiring Harness To The Dakota Digital Control Box
Connecting Blue Wire To The Tach Terminal Holes To Mount The Pushbutton Switches Putting Washers Between Switches Switches Installed Pluging In The Gauge Cluster To The Control Box Bending Dash Sheetmetal To Have Our Gauge Cluster Fit Installing The Dakota Digital Lens
Installing The Stock Chevy Gauge Pane; Installing The Dakota Digital Aluminum Trim Dakota Digital Gauge Cluster Installed
Get Adobe Flash player
Custom Classic Trucks