Custom Classic TrucksMagazine Homepage Custom Classic Trucks
Facebook Click here to find out more!

Removing Stock Gauge Cluster

 
 
Removing Stock Gauge Cluster
Removing Stock Gauge Cluster
It was necessary to remove all the Phillips screws holding the gauge cluster and the hex-head screws holding the stock blue dashpad down. View Related Article
Oil Pressure Sending Unit Dakota Digital Oil Pressure Sending Unit Removing Stock Water Temp Sending Unit Stock Chevrolet Sending Unit Dakota Digital Sending Unit Stock C10 Analog Gauge Cluster Removing Stock Gauge Cluster
Stock Th350 Cable Disconnected Disconnecting The Speedometer Cables And Wire Harness Removing Stock Wiring Harness Cut Off The Stock Harness Ends Blown Blade Type Fuse Dakota Digital Control Box Routing The Wiring Harness To The Dakota Digital Control Box
Connecting Blue Wire To The Tach Terminal Holes To Mount The Pushbutton Switches Putting Washers Between Switches Switches Installed Pluging In The Gauge Cluster To The Control Box Bending Dash Sheetmetal To Have Our Gauge Cluster Fit Installing The Dakota Digital Lens
Installing The Stock Chevy Gauge Pane; Installing The Dakota Digital Aluminum Trim Dakota Digital Gauge Cluster Installed
Get Adobe Flash player
Custom Classic Trucks