1960 - 1966 Chevy C10 Wiring Harness Cleanup - '60-66 C10 Custom Rewire

The stock '66 fuse box is under the dash on the drivers side. Two hex-head screws hold it one is hidden behind a fuse.

With the fuse box unscrewed and all of the plugs, lights, etc. disconnected the stock dash wiring harness was removed. Because some of the connectors might need to be reused we saved the harness for future use.

This is where the stock '66 body-plug for the main harness connected. A new plug will have to be devised that will seal the Keep It Clean Wiring harness from allowing moisture into the cab.

The first step to installing the Keep It Clean Wiring harness was to utilize the original fuse box's top mounting holes as a starting point. This is a good place to stop on the wiring install and handle some things that are best done with the stock wiring harness removed.