Street Rod Headquarters
Street Rod Headquarters offers complete plug-n-play airbag kits. The kits contain everything needed to set your truck up with a fully adjustable airbag suspension. The kit is based around the plug-n-play self-contained control box. The box is prewired and includes a 3/4-horsepower compressor. The kit includes: four airbags, controller, brackets, tank, compressor, 3/8-inch 150-psi valves, solenoids, dual gauges, and a wire kit.

Street Rod Headquarters
(866) 681-7421
www.streetrodhq.com

Flat Out Engineering
Flat Out Engineering offers '84-87 and '88-95 front and rear Corvette suspensions kits for '35-64 Ford trucks and '36-72 Chevy trucks. These kits will equip your ride with state-of-the-art Corvette suspension. All of Flat Out's kits are manufactured using 3/16-inch laser-cut folded, pickled, and oiled or cold-rolled steel. All shock mounts and steering mount brackets are double sheer design, and the front lower control arm mounts are CNC machined. All parts are TIG welded. Flat Out has also designed the crossmember with all the correct geometry to install the Corvette control arms, rack-and-pinion steering, sway bar, and coilover shocks to provide superior cornering, handling, and allow proper frontend alignment. All that is required are a few careful measurements to locate the crossmember correctly on your chassis.

Flat Out Engineering
(714) 639-2623

Classic Performance Products
Looking for a spindle and brake kit for your lowered truck with big tires and wheels? Classic Performance Products has released their new modular 2-inch drop spindle wheel kits for '60-87 Chevy pickups. This exclusive, new Simple Offset Solution design helps solve tire-to-fender interference commonly found with lowered trucks, due to the fact it is designed to address concerns about using aftermarket big wheels and tires by using different spindle/rotor offsets. The new modular spindle offers other benefits, including: it installs easy without modifications, works with factory ball joints and tie rod ends, lowers your truck a full 2 inches, offers adjustable steering stops, and provides 1 1/8-inch more fender-to-tire clearance. Classic Performance's new modular spindle and bracket also works with factory '71-87 C10 brake components, or CPP's big brake 13-inch rotor with twin 52mm piston brake caliper kit.

Classic Performance Products
(800) 522-5004
www.classicperform.com