|
|
1953 Chevy Truck Rear Mount Gas Tank Install - Universal City
|
|
 Then it was time to install...  Then it was time to install the fuel pump pickup. First, the depth of the tank was measured at the mounting hole, which turned out to be 8 inches.  The fuel pump pickup tube...  The fuel pump pickup tube needs to be cut at an angle with the point of the tube roughly 1/8 inch from the bottom of the tank.  The last step was to drop...  The last step was to drop the pickup unit into place. There are three outlets atop the unit. One outlet feeds the fuel pump with gas...  ...Another runs to the rollover...  ...Another runs to the rollover tube, which is mounted near the top of the inside of the wheelwell (see picture). And the last is the fuel pump return line, which Sam decided not to use, therefore it was blocked off.  As for the last hole, it's...  As for the last hole, it's for the sending unit. If you know what gauges you plan to use, the unit should be installed at this time, too. And that's how you install a universal tank. | Sources | Chevs of the 40's
800/999-2438 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
The Thinker??? - Haul Monitor
Ryan talks about the friendly badgering that goes on around the shop and overcoming obstacles that seemly pop up out of nowhere during a project....
more
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|