1971 Chevy C10 Auto Glass Installation - Project Get Shorty
|
...A variable speed grinder is then outfitted with 24-grit discs and is set around 2,000-2,300 rpm. (This slow speed will take a little longer than cutting at high speeds, but the low rpms will keep the heat down. If you can't tell, heat is the enemy.) Then it's time to grind. When grinding, keep the grinder moving at all times in 1-inch north and south passes the length of the glass. This, too, will help distribute the heat and keep things cool. Also, let the machine do the work, don't press down on the glass to speed up the cutting action. Remember: patience, Daniel-san! View Related Article
|
|