Color Me Bad
Dolphin Instruments announces two new additions to their line to equip your ride with the style and look you're after. Already established with various gauges for an abundance of classic trucks, they are now expanding into new colors. They offer their quad gauges in the black face red needle, and gold bezel beige quad gauges. To learn more about the Dolphin gauges, contact them at 386/437-1944.
Use The Force Luke, The Force
Designed for small-block Chevy applications, these exciting new Edelbrock E-Force Supercharger Kits deliver seat-of-the-pants performance right off idle. At 5 pounds of boost, these kits are capable of over 500 hp and 487 lb-ft of torque on premium pump gas. Each Edelbrock E-Force Supercharger Kit includes the Magnuson 5th-generation MP122 supercharger packaged with Edelbrock intake manifold, drive pulleys, belt, and all necessary items to install on your small-block Chevy. Utilizing the durability-proven Eaton(r) rotor assembly, these kits are proven to deliver OE-reliability with aftermarket performance. Twelve kits are offered for standard 23-degree heads or Edelbrock E-Tec/GM Vortec cylinder heads with a host of options, including: natural or polished aluminum finish, with or without carburetor and four kits specifically engineered for use with a Billet Specialties Tru-Trac serpentine drivebelt system available exclusively through Edelbrock. An optional Edelbrock Thunder Series AVS 800-cfm carburetor is pre-calibrated for use right out of the box. The Magnuson MP122 Roots-type supercharger features a built-in bypass that virtually eliminates parasitic power loss at low-rpm, part-throttle operations. For enthusiasts who want the ultimate in out-of-the-box performance, the new E-Force Supercharger Kit is also available in a complete Edelbrock E-Force RPM 350 Chevy Crate Engine package. For more information, call Edelbrock at 800/416-8628.
Give It To YA Straight
Using coiled tubing to make stock or custom hard lines just became easier with Classic Tube's new Tube Straightener Tool. Most do-it-yourselfers and professional fabricators prefer to start with straight lengths to create hydraulic lines for their projects, and this handy tool accomplishes that in minutes. This tool will straighten light-wall tubing from 3/16 to 1/2-inch OD. Using the tool is easy. Simply use the bracket to secure the tool in position with a vise. Feed the tubing into one end of the Tube Straightener and straight tubing will come out the other end. Just cut to the length you need. It's a no-brainer and this Tube Straightener Tool will save you time and money on all types of tubing fabrication projects. For more information, call Classic Tube at 800/882-3711.