Here's where the fun starts. It's time to get the hood to fit properly. Venable Koncepts started off by slowly closing the hood to see where the starting point is, then began aligning the hood through trial and error. Aligning the hood with one of No Limit's tilt kits is much easier than one might imagine. To adjust the hood from side to side, add or remove the washers that rest against the rod ends, but remember to move both sides evenly. To move the hood to the front or back, simply screw the rod ends either in or out. Moving the rod ends also adjusts the hood's tilt. The hood's rear height is adjusted by raising or lowering the rollers.