At first thought, it seems like there are a lot of parts to be installed, which could complicate things. But the cold hard fact is that installing a Billet Specialties serpentine kit really is one of the simpler installs you'll come across. Billet Specialties has gone to great lengths to make sure the kits fit and install as easy as possible. On top of that, the directions are more like a 6-year-old's picture book, making things way easy!
...He applies some silicone...
...He applies some silicone on one side and screws them into the water pump bosses until they are all the way into the block.
On the passenger side, Brian...
On the passenger side, Brian slides this water pump mounting spacer over the studs, but first he installs the O-rings on both sides of the water pump spacer along with the bypass O-rings. Both the water pump spacer and alternator brackets incorporate O-rings.
On the driver side, the water...
On the driver side, the water pump spacer is built into the alternator mounting bracket. Brian places the O-rings on and slides the bracket over the remaining studs.
Next up, he installs the new...
Next up, he installs the new Edelbrock reverse rotation water pump.
Brian secures the water pump...
Brian secures the water pump in place with the four spacer nuts. The spacers are double-threaded because they hold the water pump in place and act as a mounting position for the other brackets. The shortest spacer nut is for the lower passenger-side stud.
With the water pump installed,...
With the water pump installed, Brian installs the new billet crank pulley.
When it comes time to mount...
When it comes time to mount the power steering pump, the power steering bracket needs to be mounted to the alternator bracket....
...Then the pump slides into...
...Then the pump slides into the bracket and mounts. By rotating the pulley on the pump, Brian can get to the bolts' head.
The belt tensioner support...
The belt tensioner support bracket mounts to the two lower passenger threaded bosses.