|
|
1974 Chevy Short Step - Auburn Gear LSD
|
|
 With the axles pulled outward,...  With the axles pulled outward, the next step was to remove the bearing caps.  anuel removed four bolts from...  anuel removed four bolts from the two bearing caps, then...  ...withdrew the different...  ...withdrew the differential.  The next step was to remove...  The next step was to remove the shim packs.  With the differential housing...  With the differential housing emptied as far as need be for this job, Manuel focused on readying the ring gear to be fitted to the Auburn Gear LSD. Manuel backed the ring gear retaining bolts completely out with a 1/2-inch-drive air impact gun.  Then he smacked the open differential's...  Then he smacked the open differential's right side face directly onto the cement slab...  ...to release the ring gear...  ...to release the ring gear from the open differential.  Mike loaded the bearing caps,...  Mike loaded the bearing caps, hardware, and ring gear into a steam cabinet for cleaning before reassembly.  Within half an hour the parts...  Within half an hour the parts were ready...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Thinker??? - Haul Monitor
Ryan talks about the friendly badgering that goes on around the shop and overcoming obstacles that seemly pop up out of nowhere during a project....
more
|
|
|
|
|
|
|
|