 ...You might as well proceed...  ...You might as well proceed to make your Effie a better cornering and appearing pickup. |  We installed the Heidt's front...  We installed the Heidt's front crossmember 6 inches forward of the front axle's stock location. We had to move the boxing plate forward to accommodate the moved crossmember. |  With the front end in place...  With the front end in place in the enlarged opening, you can see the wheel/tire has moved forward. |
 I trial-fit the removed driver-side...  I trial-fit the removed driver-side fender sheetmetal. You can readily see where the 7-inch-wide fill piece will go. |  We tack welded the fender...  We tack welded the fender well in its new location for both front fenders. | 
I tack welded the... |
 ...7-inch-wide fill piece...  ...7-inch-wide fill pieces. |  To make the bottom of the...  To make the bottom of the fender look correct, we added a bit of material to the metal to improve the reveal's appearance. |  Now that all the welding and...  Now that all the welding and fill metal is in place, the bodywork and paint prep can begin. |