1971 Chevy C10 - Tilt Into A New Steering Column

Including a new turn signal switch and tilt knuckle, PCC also rebuilt the upper end.

To keep the outer housing from moving from side to side, lightly tapping it as it went on kept it square.

As you can see, PCC replaced the indicator light and the tilt control arm.

We also installed a new turn signal indicator lever.

In addition, we installed a new shift indicator lever.

We gave the upper end a final check to make sure everything worked properly and felt snug.

Lastly, PCC installed the small cover that clips on to hide the wiring coming out of the column cone.

To hold it securely in place, we wrapped the cover in electrical tape. The electrical tape will not be seen once the column is installed in the vehicle.

Obtained from a local auto parts supplier, here's the wiring adapter that comes with the new turn signal switch. The wiring adapter makes the new-style plug and the old one in the '71 C10 shop truck compatible.