|
|
1958 Chevy Truck - Righteous Rear Framerails
 According to the level, the...  According to the level, the to-be-welded subframe had horizontal lines and was ready to be joined with the existing frame ends. |  Satisfied the subframe was...  Satisfied the subframe was in position for welding, Kevin ground off the temporary brace. |  After tack welding the old...  After tack welding the old 'rails to the new, KA Custom made a cardboard template for the splints that will help join the two metal surfaces. |  Kevin cut out the two metal...  Kevin cut out the two metal splints with the plasma cutter. |  Smoothing out the splints'...  Smoothing out the splints' edges ensued. |  As you can see from the three...  As you can see from the three holes in the existing frame, KA Custom planned to Rosetta weld the splint plates in place before laying down the tack and bead welds. Kevin clamped the plates in preparation for firing up the welder. |  Rosetta and tack welds went...  Rosetta and tack welds went down with precision. |  Every so often allowing the...  Every so often allowing the metal to cool,... |  ...Kevin laid on some artful...  ...Kevin laid on some artful bead welds. |
Discuss in our Forums
GMC Yukon XL Research
Finding a fuel efficient automobile today is easier than ever. Check out the GMC Yukon XL buyer's guide providing information on car specs, reviews and fuel economy. The 2009 Yukon XL is offered with your choice of V8 engine, and it has a comparable warranty. Other similar vehicles are the Ford F150 and the Ford Expedition.
|
|