|
|
1958 Chevy Truck - Volare, Noooooo!
 The Milwaukee Sawzall may...  The Milwaukee Sawzall may not be as flashy, but it gets the job done. |  For straightening the channeled...  For straightening the channeled frame, a tightened crescent wrench works well. |  Kevin used a putty knife,...  Kevin used a putty knife,... |  an air grinder, and an air...  an air grinder, and an air chisel to clean the old frame. |  He evened out both ends with...  He evened out both ends with the plasma cutter... |  ...and smoothed the cuts with...  ...and smoothed the cuts with the grinder. |  A Carbide tip on the die grinder...  A Carbide tip on the die grinder enabled him to open up the holes in the old framerails for the Rosetta welds. |  Notice that the plumb bobs...  Notice that the plumb bobs on the new framerails match the reference points marked on the floor from hanging them on the old framerails. |  Stock boxing plates serve...  Stock boxing plates serve as a welding splice or splint between the old 'rails and the new. |
Discuss in our Forums
GMC Yukon XL Research
Finding a fuel efficient automobile today is easier than ever. Check out the GMC Yukon XL buyer's guide providing information on car specs, reviews and fuel economy. The 2009 Yukon XL is offered with your choice of V8 engine, and it has a comparable warranty. Other similar vehicles are the Ford F150 and the Ford Expedition.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1958 Ford F-250 & Other Readers Trucks
Check out this month's reader's rides: A 1958 Ford F-250, 1962 built by J&A Auto Body in Spokane, Washington, who took the '58 under their wing as a 'project' in their spare time and made it...
more
|
|