TCI Four Link Suspension - TCI Four-Link Install

...cold chisel into the rivet heads....

...To achieve the best removal results he alternated methods.

Here's how George used...

...a body grinder to work...

...at removing the rivets.

After the perches were removed, George used the body grinder to clean up the frame's surface by dressing it off.

With the frame's surface clean, George was ready to unbolt the rear crossbrace (necessary to improve access).

The TCI four-link front mounting plate was bolted into place utilizing the rivet holes from the stock front perch after they were drilled out to 5/8-inch.

With the mounting plate bolted down tight,...