|
|
TCI Four Link Suspension - TCI Four-Link Install
|
|
 ...George then used it as...  ...George then used it as a template to drill the upper link's 7/16-inch mounting bolt's hole through the framerail.  Here George is pushing the...  Here George is pushing the upper link into place...  ...using a Soft-Blow hamm...  ...using a Soft-Blow hammer.  Before installing the mounting...  Before installing the mounting bolts, George used and recommended anti-seize.  He used the Soft-Blow hammer...  He used the Soft-Blow hammer to drift the mounting bolts into place.  With the bolts pressed all...  With the bolts pressed all the way through, George was able to screw the nut on...  ...and snug them down.  Here are the properly installed...  Here are the properly installed upper and lower links.  Before mounting the TCI rear...  Before mounting the TCI rear crossmember into place, George used a 12-inch crescent wrench to spread the framerails open....
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Thinker??? - Haul Monitor
Ryan talks about the friendly badgering that goes on around the shop and overcoming obstacles that seemly pop up out of nowhere during a project....
more
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|