To avoid glob-like gap-filling welds, the PipeMaster is the tool that will save you time, material and frustration.
Stop wasting costly metal due to inadequate fitment when PipeMaster will help you cut the correct shape the first time. For compound tube and pipe joints, place the tube where you want it to mate, slide the PipeMaster down the tube and push the housing down far enough so the spring-tempered stainless steel rods match the shape of the joint. Pull the tool back up the tube far enough to trace the shape outlined by the rods. Cut along that line and the tube is ready to be welded in place!
Whether you have two, three, four or more pipes joining at a single point, PipeMaster will take the guesswork out of creating joints. Tools sizes range from 1/2-inch to 12-inches and are also available in four popular kits: Dragster (1-1/2 & 1-5/8-inch tubing), Stock Car (1-1/2 & 1-3/4-inch tubing), Truck and Jeep (1-3/4 & 2-inch tubing) and Pro Racer (1, 1-1/4, 1-1/2, 1-3/4 & 2-inch tubing).