Editor's Note: Getting your truck into Readers' Trucks is a snap, of the camera, that is. All it takes is a stack of good-quality photos of your ride that are in focus and well lit. Due to the volume of mail we receive, we regret that we cannot return photographs. Send photos of your truck (no Polaroids or printouts) to: CCT, Readers' Trucks, 774 S. Placentia Ave., Placentia, CA 92870. It is important that you include a detailed description of the modifications you have made to your truck, including any interesting stories behind it.

Pop's '32
When Mike "Pops" Walsh built his '32 Ford roadster pickup he went through every good shop in town with a big magnet. The first magnetic surface, a '32 chassis with a 3-inch stretch in wheelbase was sourced from Randy at Hot Rods & Customs of Escondido, California. For brakes, the '32 is running four Buick finned aluminum drums with adapters from Walden's. Under the custom hood made by Marcel and louvered by Eric Vaughn sits a 350-inch Chevrolet with a Lokar-shifted 700-R4, built by Jimmy G, and a Currie 9-inch rearend. A Walker radiator handles the cooling shores. The interior was done by Jack Weimer of Sun Valley, California, and sports Stewart-Warner gauges with a Moon tach. Mark at Bent Tubing of Chatsworth, California, plumbed the '32 with stainless steel lines that suck brake fluid from a custom-made set of reservoirs from Kugel Komponents. The bright yellow exterior features gold leaf and pinstripping by Tom "Itchy" Otis over the top. The layback windshield was done by Rick Rodwell, and the cherry wood bed with polished stainless steel skids was done by a friend of "Pops" he works with at the movie studios.

High Plains Drifter
A retired welder, Danny Bowman lives up on Southern California's high desert near the town of Apple Valley, and by the looks of things found himself with a little spare time on his hands. Danny said it all started when he drove down the hill to Long Beach, California, to attend the Veteran's swap meet, with the intention of finding a truck he could cruise Mojave Desert with. The search ended with Danny finding an '86 Chevy 4x4 that was in real nice condition. Life was good, Danny had a '55 Chevy Big-Window shortbed stepside with a 327 and a Muncie four-speed, and a good running Chevy 4x4 with a 350 automatic sitting side-by-side in his garage. Danny said one day he lifted the garage door open, and decided to go to town. Before it was all said and done the '55 was powered by an Edelbrock crate motor putting out 363 horsepower, with 405 lb-ft of torque. With an Edelbrock AFB carburetor sitting on top of an Edelbrock intake manifold and an Edelbrock camshaft one could say the motor is pure Edelbrock from top to bottom, except for an MSD distributor that is. Looking back at all of the work involved to swap the '55 to on top of the '86 4x4 Chevy chassis, Danny said it wasn't a cake walk, but now that it's done he really enjoys driving it.